When the furnace stops working on a January night, or the AC is running but nothing is cooling down, the call you need to make is a short one. We handle heating and cooling work across Hanover and the surrounding area: furnace repair and replacement, AC repair and service, heat pump installation, ductless mini-splits, whole-home humidifiers, ductwork repair and sealing, thermostat and smart-control installation, indoor air quality, and emergency calls when the system goes down without warning. The pricing conversation happens on the phone before anything is scheduled. We are open every day from 8:30 AM to 11:00 PM.
Hanover is a town where a lot of the housing stock runs on equipment that has been doing its job for years. Forced-air gas furnaces, older thermostats, ductwork that was never quite right for an addition on the back of the house. That is the kind of work we see most often, and whoever comes out knows the systems these homes use.
Call (763) 999-8289 to get a quote or to schedule a service call.
Most people replace a thermostat because the old one failed. The better reason is what a modern control does that a ten-year-old one cannot. A communicating thermostat reads the actual temperature at the sensor, adjusts the system's run cycles to hold that temperature steadily, and in some configurations reports back on system performance so a fault shows up as a reading rather than a breakdown.
An older thermostat that is drifting, reading the wrong temperature, or failing to communicate with the air handler can make a furnace or AC behave as though something is wrong with the equipment when the control is the actual problem. Before a repair call turns into a parts replacement, it is worth ruling that out.
Smart thermostat installation is a straightforward upgrade when the existing wiring supports it, and in most forced-air systems it does. The thermostat is confirmed as communicating before sign-off on any installation, so the job is not done until the system is actually responding to it.
Where a home has rooms that are consistently warmer or cooler than the rest, zoning and comfort-control systems address that at the distribution level rather than by running the whole system harder. Zoned HVAC lets different areas of the home hold different temperatures independently. That is worth asking about on the call, particularly in homes where an addition or a finished basement never quite matched the rest of the house for comfort.
Landlords and property managers call us for the same work homeowners do, but the logistics run differently. When a tenant is in the unit, access has to be arranged around them. The repair scope is explained to the property owner or manager on the phone, the appointment is confirmed with whoever needs to be there, and the invoice goes to whoever is responsible for the property.
For a landlord managing several units in the area, having one contractor who can handle furnace repairs, AC calls, and heat pump service across a portfolio is a practical arrangement. We work on residential rentals and small commercial buildings alike. Call and describe the property and the system, and we will scope the work from there.
A no-heat call on a rental unit in the middle of winter is not a problem that waits for a convenient appointment. Emergency heating calls are answered when they come in. The property owner or manager gets the diagnosis and the repair options on the call, and the work is authorized before anything is done. Careful HVAC work that respects your home applies to rental properties the same as owner-occupied ones.
The price for a service call is confirmed on the phone before the visit is scheduled. What moves the number after that is what the diagnosis actually finds. A capacitor replacement is a different conversation from a failed heat exchanger. A duct seal on an accessible run is different from one buried in a finished ceiling. Whether a repair is the right answer or a replacement is the better value depends on the age of the equipment, what failed, and what the repair would cost relative to what a new system would.
None of those figures are settled on the phone before the system is looked at, and that is the honest answer. What you get on the call is the rate for the visit and a clear explanation of what it covers. The repair quote follows from the diagnosis, and if replacement is worth considering alongside repair, we walk through both options with actual numbers before anything is authorized.
We do not offer a free estimate or a free inspection. The service call is what it costs, and that cost is confirmed before we schedule.
A furnace that runs but cannot bring the house up to temperature, one that short-cycles, one that will not start at all, or one making a sound it has never made before are all reasons to call. The visit covers the igniter, the heat exchanger, the blower motor, the flame sensor, and the controls. When repair costs are running close to what a replacement would cost, or when the equipment is old enough that another failure is likely soon, we scope both options so the decision is based on real numbers.
A restricted or damaged evaporator coil shows up as weak cooling, poor airflow, or ice forming on the indoor unit. A coil that has not been cleaned in several years can restrict airflow enough to affect the whole system's efficiency, and a coil that is leaking refrigerant needs more than a cleaning. The diagnosis covers both, and the repair scope is explained before any work is authorized.
Ductless mini-splits work well for additions, finished basements, or any space where running new ductwork is not practical. They also work as a zoning solution for homes where one area runs significantly warmer or cooler than the rest. Installation involves matching the equipment to the space, confirming the indoor and outdoor units are positioned correctly, and testing the system before the job is closed.
A bang on startup, a persistent rattle from the air handler, a grinding sound from the outdoor unit, or a high-pitched squeal from the blower are all worth a call rather than a wait. Most of those sounds point to something specific: a loose blower wheel, a failing motor bearing, a heat exchanger under stress, or a refrigerant issue. Letting a noise go tends to turn a smaller repair into a larger one.
These are among the more common electrical component failures in residential HVAC equipment, and they often show up as a system that will not start, one that starts and immediately shuts off, or one that runs but does not cool or heat. A capacitor that has failed, a contactor that is pitted or stuck, or a control board that has lost a signal can each produce symptoms that look like equipment failure when the fix is a component replacement. The diagnosis identifies which one before any parts are quoted.
Appointments are scheduled on the call, after the scope and the price are confirmed. For routine service calls and seasonal tune-ups, you choose from what is available and we confirm the details before anything is booked. The appointment covers what the visit includes, what it costs, and what happens when the technician arrives.
For emergency calls, the process is the same but the timeline is shorter. We take no-heat and no-cool calls every day from 8:30 AM to 11:00 PM. Describe what the system is doing and we will scope the situation on the phone before the visit is scheduled. A furnace that has stopped working in the middle of a cold stretch, an AC that has shut down when the temperature outside is not cooperating, or a system that went down in a rental unit with a tenant in it are all situations we handle.
For businesses and properties that need to stay open during the work, we confirm the access and the timing on the call so the visit does not disrupt operations. A heat pump, furnaces and mini-splits all within scope, so there is no need to find a second contractor regardless of what the system turns out to be. Have a look at our full list of HVAC services for the work broken down.
We serve Hanover and the towns around it in Wright County, including St. Michael, Greenfield, Rogers, Albertville, and Corcoran. Residential homeowners, landlords, and commercial property owners across this part of the area are all within our service area.
If you are searching for furnace repair, AC service, heat pump installation, or emergency HVAC help in or near Hanover, call (763) 999-8289 and we will confirm coverage for your address before anything is scheduled.
Forced-air gas furnaces are the dominant heating system in this part of the region, and the most common calls involve furnaces that will not start, are short-cycling, or are producing less heat than they used to. Older thermostats that have lost communication with the system, evaporator coils that have not been serviced in years, and ductwork that was never properly sealed for an addition are also frequent issues.
If you are noticing something that does not seem right, call (763) 999-8289 and describe what the system is doing.
That depends on the number of systems and what each one needs. Describe the scope when you call and we can work out whether a single visit covers it or whether multiple appointments make more sense. Combining work where possible is more efficient for everyone.
Coverage terms on a new unit differ by brand and depend on whether the equipment is registered after installation. The paperwork that comes with a new installation includes the manufacturer's documentation, and the terms are worth reviewing before assuming coverage transfers automatically. Ask about it at the time of installation if the property may change hands.
Call (763) 999-8289 and describe the system and the situation.
We will scope the emergency on the call, confirm the rate for the visit, and arrange access around the tenant. The repair options are explained to the property owner before any work is authorized, and the invoice goes to whoever is responsible for the property. We take no-heat calls every day from 8:30 AM to 11:00 PM.
Yes. We serve Hanover and the surrounding communities, including St. Michael, Greenfield, Rogers, Albertville, and Corcoran, as well as the broader Wright County area.
Call (763) 999-8289 to confirm coverage for your specific address before scheduling.
If the house has had a room that never quite heats up, a system that runs longer than it should, or a furnace that has been making a sound you have been ignoring, the call is the point that changes it. We are open every day from 8:30 AM to 11:00 PM.
Call Plymouth HVAC Company at (763) 999-8289 for a quote, and we will tell you what the work involves before anything is booked.
Heating and cooling service reaches these neighboring areas too: Rockford, Buffalo, Delano, Monticello, Big Lake.
Check our map of areas.
We cover the full range of residential and commercial heating and cooling work across Hanover and Wright County, from a single repair call to a full system replacement. The table below lays out what each service involves, who it fits best, and a practical note to help you decide where to start. Every job begins with a diagnosis, and the price is confirmed before anything is scheduled.
Call (763) 999-8289 to talk through what your system needs.
| Service Type | What's Included | Best Suited For | What to Keep in Mind |
|---|---|---|---|
| Furnace Repair & Replacement |
| Hanover homeowners facing a furnace that will not start, blows cold air, or has already needed repeated repairs | A cracked heat exchanger is a safety issue as well as a performance one. A fall tune-up is the right time to find it before the heating season peaks. |
| Heat Pump Repair & Service |
| Homes running a heat pump as a primary or supplemental system | A heat pump that struggles in heating mode often has a refrigerant or defrost issue rather than a compressor problem. |
| HVAC System Installation & Replacement |
| Homeowners replacing aging equipment or upgrading an undersized system | Sizing the new unit to the home's actual load, not just matching what was there before, is what determines long-term comfort and efficiency. |
Call (763) 999-8289 to talk through what your system needs and get a price before anything is scheduled.
(763) 999-8289